How to reset canon ink cartridges of print head and reset error
In most cases that we found of canon ink cartridges, if you have ink out error or your cartridge not recognize message. If you press and hold stop, reset button, ok or resume button on your printer for 10 seconds or more and your printer may continue under the ink out condition. If this method is not works for you so you can try this option below.
You must have 4 different cartridges and it no important if it empty. Each Canon Cartridges has a chip with the serial number. Each printer also have an internal memory and that remembers the serial numbers of the cartridges that you use. Therefore it can happen if you recently refilled the cartridges and it is stated to be empty. But the memory of your printer that usually remember only the last 4 cartridges. So you you are now inserting the succession 4 different empty cartridges or not and after that the recently refilled one. The printer should be recognize and accept it. You can take out the empty cartridge that you want to refill it after that put the first cartridge in the printer then allow the printer to recognize the new cartridge. After you let the printer recognize the first cartridge then take first cartridge out and replace with the second cartridge and let printer to recognize it again. Do like these until you reach 4 cartridge. Take the fourth cartridge out, now place the refilled cartridge back in the printer. The empty cartridge error message should be reset.
Relate Post: Supplies Outlet Coupon