Below you will see a great tips to build craft center
Build a worktable with a huge surface that convenient storage and easy mobility by sandwiching three small storage nits between a base with casters and plywood top with hardwood edging. You just spend for $330 on material for the table with the step to build below.
Cut hardwood plywood for the top and base and install hard wood edging and iron on edge banding.
Step1: Position two kallax shelving unit back to bak and fasten then to the base with flat head sheet metal screws after drilling countersink pilot holes through the kallax frames.
Step2: The frames are hollow panels so be careful not to punch through their thin faces when drilling the countersinks. Make sure that the screw heads seat flush. Install the third kallax unit across the front of the base, using the same method. Tips the assembly over onto the top and fasten it as before.
Step3: Install locking swivel caster.
Step4: Tip the assembly right side up and round over all the top’s sharp edges with a router and round over bit. Complete the job by installing Kallax drawer inserts and applying your fabvourite finish to the top.
For the material that you can find from IKEA that have a list below.
IKEA Kallax Shelving Unit 3 QTY, IKEA Kallax Insert with Two Drawers 4′ x 8′ x 3/4″ birch plywood Birch, Iron on edge banding 25′, 3/4″ x 1-1/2″ birch or maple solid wood 20′, 3″ locking swivel casters 4 QTY, No. 12 x 2″ Flat head sheet metal screws Polyurethane, wood glue 24 QTY.